building. climate. excellence.
building. climate. excellence.
UC = unmixed heating circuit, MC = mixed heating circuit. F or UP = application for flush-mounted version, S or AP = application for wall-mounted version, SI or AP insul. = application for wall-mounted version as insulation housing, UFH-M = floor manifold for mixed heating circuits, PW concept = prewiring concept, UC-L = extension for 2nd static heating circuit, FFR = mounting rails, BV = ball valve set.
The Logomatic G2 complete stations permit combination with a wide range of complementary products for further functionalities and equipment for enhanced comfort and easier, optimised integration into building or installation technology. For instance, floor manifolds and prewiring concepts can be combined with one another and with the station to save both time and space in installation. Moreover, mounting rails and extensions to the 2nd static heating circuit allow for easier preinstallation.
All underfloor manifolds are pre-assembled on a base plate and are fitted with the heating circuits specified below.
Underfloor manifold | |||
Type F | Type E | Type G | |
Width x height x depth [mm] (dimensions of the housings to be taken into account) | 576 x 503 x 1401) | 792 x 430 x 1401) | 500 x 452 x 1402) |
Connection to the heating circuits | 3⁄4" M - Eurokonus | 3⁄4" M - Eurokonus | 3⁄4" M - Eurokonus |
Arrangement of the supply connections: | top | top | top |
Heating circuit manifold material | Stainless steel | Stainless steel | Stainless steel |
Control range flow rate limiter [l/min.] | 0,5 - 5 | 0,5 - 5 | 0,5 - 5 |
Max. pressure load (bar) | PN6 | PN6 | PN6 |
Max. temperature load [°C] | 100 | 100 | 100 |
Valve inserts M30 × 1.5 with manual adjustment flaps | ✓ | ✓ | ✓ |
1) = installation depth increases to 160mm if prewiring packages are used or increases in general if floor terminal blocks and their mounts are installed.
2) = these floor manifolds are used with wall-mounted stations. The wall-mounted housings supplied by our company require an increased installation depth. Therefore, please take the housing dimensions into account!
Kopš 1956. gada Flamco ir iesaistījusies augstas kvalitātes komponentu izstrādē, ražošanā un pārdošanā izmantošanai HVAC sistēmās. Tā ir daļa no 1975. gadā ieviestās “Aalberts NV”. Kopā ar Comap, kas palīdz pārvaldīt ūdeni un enerģiju ar saviem termiskajiem un sanitārajiem produktiem, kas paaugstina komfortu ēkās, tika izveidota Aalberts hidronējuma plūsmas kontroles struktūrvienība. Spēcīgā sadarbībā Flamco un Comap turpinās savu pamatuzdevumu - veidot svarīgas darbības tehnoloģijas, lai humāni pārvaldītu apkuri un dzesēšanu ar labāku finanšu un vides efektivitāti. No avota līdz emitētājam mēs sadarbojamies ar saviem klientiem, lai projektētu nevainojamas, energoefektīvas hidroloģiskās sistēmas to būvēšanas vajadzībām.
comap.aalberts-hfc.com | aalberts-hfc.com
Saņemiet jaunāko informāciju. Abonējiet mūsu biļetenu.
Es piekrītu savu personas datu apstrādei. Aalberts hydronic flow control piešķir lielu nozīmi jūsu privātumam.