building. climate. excellence.
building. climate. excellence.
UC = unmixed heating circuit, MC = mixed heating circuit. F or UP = application for flush-mounted version, S or AP = application for wall-mounted version, SI or AP insul. = application for wall-mounted version as insulation housing, UFH-M = floor manifold for mixed heating circuits, PW concept = prewiring concept, UC-L = extension for 2nd static heating circuit, FFR = mounting rails, BV = ball valve set.
The Logomatic G2 complete stations permit combination with a wide range of complementary products for further functionalities and equipment for enhanced comfort and easier, optimised integration into building or installation technology. For instance, floor manifolds and prewiring concepts can be combined with one another and with the station to save both time and space in installation. Moreover, mounting rails and extensions to the 2nd static heating circuit allow for easier preinstallation.
All underfloor manifolds are pre-assembled on a base plate and are fitted with the heating circuits specified below.
Underfloor manifold | |||
Type F | Type E | Type G | |
Width x height x depth [mm] (dimensions of the housings to be taken into account) | 576 x 503 x 1401) | 792 x 430 x 1401) | 500 x 452 x 1402) |
Connection to the heating circuits | 3⁄4" M - Eurokonus | 3⁄4" M - Eurokonus | 3⁄4" M - Eurokonus |
Arrangement of the supply connections: | top | top | top |
Heating circuit manifold material | Stainless steel | Stainless steel | Stainless steel |
Control range flow rate limiter [l/min.] | 0,5 - 5 | 0,5 - 5 | 0,5 - 5 |
Max. pressure load (bar) | PN6 | PN6 | PN6 |
Max. temperature load [°C] | 100 | 100 | 100 |
Valve inserts M30 × 1.5 with manual adjustment flaps | ✓ | ✓ | ✓ |
1) = installation depth increases to 160mm if prewiring packages are used or increases in general if floor terminal blocks and their mounts are installed.
2) = these floor manifolds are used with wall-mounted stations. The wall-mounted housings supplied by our company require an increased installation depth. Therefore, please take the housing dimensions into account!
Flamco on HVAC-süsteemide komponentide arendamise, tootmise ja müügiga tegelenud alates 1956. aastast. Flamco on börsinimekirja kuuluva ettevõtte Aalberts NV osa, mis asutati 1975. aastal. Koos Comapiga, mis aitab hallata vett ja energiat oma soojus- ja sanitaartoodete abil, suurendades hoonete mugavust, moodustati Aalbertsi hüdraulilise voolu juhtimise äriüksus. Koos oleme tugevamad ning Flamco ja Comap jätkavad missioonikriitiliste tehnoloogiate väljatöötamist, et juhtida kütmist ja jahutust parema finants- ja keskkonnatõhususega. Teeme koostööd oma klientidega kütteallikatest kuni soojuskiirguseni ning loome määrava tähtsusega tehnoloogiaid nii murranguliste tööstusharude kui ka igapäevaelu jaoks.
comap.aalberts-hfc.com | aalberts-hfc.com
Olge kursis. Tellige meie uudiskiri.
Nõustun oma isikuandmete töötlemisega. Aalberts peab oluliseks teie privaatsust.